Thanks for the heads up! What are the primary signs that the bearings are wearing out? --t On Monday, July 27, 2015, Alistair Bell <albell@shaw.ca> wrote: > The two 22 mm OD bearings that sit in horizontal position under the > sliding door cover . I just replaced a couple on friends van. The originals > were worn out, one of them very worn out. > > Friend bought four online, around 2 bucks each. Double seal, deep groove > bearings. OD 22mm, ID 8mm, thickness 7mm. > > They sit on studs on the door mechanism, held in place by circlip. > Circlips replaced by E clips. > > Just a heads up, less expensive to buy the bearing by specifications > rather than the VW part number (251.843.425A). > > Alistair > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.