don't stroke the pedal fully to the floor.. half strokes only. pause at 'pedal up' . On 7/23/2015 4:05 PM, Jack Reynaert wrote: > We've changed the brake lines, and it has a newer master cly, changed in > 2012. > > The odd issue is that we have pressure on the pedal and pump 3 times, open > the bleeder and fluid with comes out as pedal goes to the floor. > Like it should. > > However, the pedal is totally soft and will not have pressure until we let > it set for 10 minutes or so. > WE can repeat the process over and over again, with no improvement. > > Any suggestions? > > Thanks! > > Jack R... working on our friend 90 Westy. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.