I can probably find one if you sent me a postal address and you're not in a hurry, but I think Fastenall or a FLAPS would be a good place to look along with ACE. I'm sure you'll find one. What Alistair said about the wire has held my struts on more than a few times. I seem to manage to lose about 50 percent Jim On Thu, Jul 23, 2015 at 10:56 AM Alistair Bell <albell@shaw.ca> wrote: > The ball end clip or the stud end c-clip? > > I've resorted to a bit of wire inserted in and bent around at the ball > end. The stud end circlip might be sourced, at least approximated , at > flaps. > > Alistair > > > > > > On Jul 23, 2015, at 8:41 AM, Steven Johnson <sjohnso2000@GMAIL.COM> > wrote: > > > > Hello All, > > > > On my 90/91 Westy I was replacing the shocks/struts for the rear hatch > and > > while > > doing so launched into oblivion one of the little circlips that hold the > > one open end on. > > > > Does anyone know the correct size and metallurgy for these little guys > so I > > can maybe > > pick one or two out from the hardware store? Or these specific only to > > that particular > > connecting point? > > > > Thanks! > > > > Steven > > > > 91 Westy > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.