Date: Fri, 24 Jul 2015 13:59:20 -0400
Reply-To: mike riley <mkriley1@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: mike riley <mkriley1@HOTMAIL.COM>
Subject: Re: 7mm braided coolant hose, overflow to pressure
In-Reply-To: <033d01d0c638$4a54bd00$defe3700$@gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
every hose that fit is not suitable for the application.
mike
PS try putting fuel injection hose on your brake reservoir
> From: stuartmacm@gmail.com
> To: mkriley1@HOTMAIL.COM; vanagon@GERRY.VANAGON.COM
> Subject: RE: 7mm braided coolant hose, overflow to pressure
> Date: Fri, 24 Jul 2015 10:43:45 -0700
>
> You may not be able to find the OEM hose, but a large vacuum hose or
> standard, more flexible, low pressure fuel hose should work. Check your
> FLAPS, they will sell various hose sizes by the foot. As long as it fits
> snugly, this hose doesn't need a clamp because it is not under any pressure,
> you just don't want it falling off from vibration.
>
> Even a piece of vinyl tubing from Lowes or HD should work fine.
>
> Stuart
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> mike riley
> Sent: Friday, July 24, 2015 10:00 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: 7mm braided coolant hose, overflow to pressure
>
> thanks,
> they did not have the right stuff.
> the oem hose has a black covering with a red thread in it to differentiate
> it from fuel hose which gets hard and stiff with coolant use and from brake
> line hose which has a blue liner. I still have the oem hose which is getting
> short from trimming the ends every decade. Still soft and supple after all
> these years and works without a hose clamp.
> mike
>
> From: jondvo@gmail.com
> Subject: Re: 7mm braided coolant hose, overflow to pressure
> Date: Fri, 24 Jul 2015 10:39:26 -0600
> To: mkriley1@hotmail.com
>
> Notice GAS has changed. Try Belmetric, they have the proper size but don't
> see red color
>
> Sent from a rotary phone
> On Jul 24, 2015, at 10:23 AM, mike riley <mkriley1@hotmail.com> wrote:
>
>
>
>
> no luck there they don't seem to have any hoses
>
> > Subject: Re: 7mm braided coolant hose, overflow to pressure
> > From: jondvo@gmail.com
> > Date: Fri, 24 Jul 2015 10:03:39 -0600
> > CC: vanagon@GERRY.VANAGON.COM
> > To: mkriley1@HOTMAIL.COM
> >
> > I believe German auto supply may have that
> >
> > Sent from a rotary phone
> >
> > > On Jul 24, 2015, at 8:36 AM, mike riley <mkriley1@HOTMAIL.COM> wrote:
> > >
> > > anybody know who carries the oem braided cooling line with the red
> thread on the cover. Just ordered the part from one of our suppliers and got
> 5/16 fuel injection hose. TOO STIFF and WRONG SIZE need to use a hose clamp
> on it unlike the OEM stuff
>
> =
>
|