Date:         Fri, 24 Jul 2015 09:18:34 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Re: Odd Brake Bleeding issue in 90 Westy
Comments: To: Jack Reynaert <jack007@COMCAST.NET>
In-Reply-To:  <009101d0c5b5$32e51210$98af3630$@net>
Content-Type: text/plain; charset="us-ascii"

Maybe it's just me, but I've always had problems bleeding Vanagon brakes
manually.  This is my solution, and it's worth every penny:
http://motiveproducts.3dcartstores.com/Black-Label-European-Bleeder-0109_p_1
01.html   I have adapters for all of my cars since brake fluid should be
flushed out with new fluid every two years. Now it's easy!

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Jack Reynaert
Sent: Thursday, July 23, 2015 7:05 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Odd Brake Bleeding issue in 90 Westy

We've changed the brake lines, and it has a newer master cly, changed in
2012.

The odd issue is that we have pressure on the pedal and pump 3 times, open
the bleeder and fluid with comes out as pedal goes to the floor.
Like it should.

However, the pedal is totally soft and will not have pressure until we let
it set for 10 minutes or so.
WE can repeat the process over and over again, with no improvement.

Any suggestions?

Thanks!

Jack R... working on our friend 90 Westy.