Date:         Tue, 28 Jul 2015 10:06:04 -0400
Reply-To:     Dennis Jowell <dennisjowell@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Jowell <dennisjowell@GMAIL.COM>
Subject:      Re: 88 Westy fuel connection
Comments: To: "kenneth wilford (Van-Again)" <kenwilfy@comcast.net>
In-Reply-To:  <CANEuo0juNmec-ET8qM0rX6ZsGSkJJtT6iyOqF3VZREuwPxmLzg@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

Thanks ken. I wanted to clean up the copper pipe connection mess and wondered what the stock install may have looked like. The current configuration does work. I probably should just leave it alone.

Dennis Jowell
Scotch Hollow Farm
Newbury, Vermont 


> On Jul 27, 2015, at 8:02 AM, kenneth wilford (Van-Again) <kenwilfy@comcast.net> wrote:
> 
> That is a rig up, but it will work.  You could also buy a plastic cube fuel filter and it would do the same thing.  The outlet of the tank is the smaller version which means someone replaced the tank at some point in the past.  The 88s originally had the larger outlet that would hook directly to the pump with no "adapter" needed or fuel filter.  You can leave it as is, if you wish.  Doesn't seem to be hurting anything.
> 
> Ken
> 
>> On Mon, Jul 27, 2015 at 7:09 AM, Dennis Jowell <dennisjowell@gmail.com> wrote:
>> Hi all,
>> Just about finished replacing all of my 88 Westy fuel lines and have a question on the tank to fuel pump connection. My photos show what I have now. I wonder is that the correct way to make the connection or is that a PO set up. What is the correct way to set this up?
>> http://s1382.photobucket.com/user/dennisjowell/library/  this link hopefully shows what the connection looks like. Thanks for any help
>> 
>> Dennis Jowell
>> Scotch Hollow Farm
>> Newbury, Vermont
> 
> 
> 
> -- 
> Thanks,
> Ken Wilford
> John 3:16
> www.vanagain.com