Date:         Sun, 9 Aug 2015 22:04:32 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Broken dipstick tube
Comments: To: Stuart MacMillan <stuartmacm@gmail.com>
In-Reply-To:  <01be01d0d23d$f1be1a30$d53a4e90$@gmail.com>
Content-Type: text/plain; charset=UTF-8

I dot know if the repair I did is at the same part of the tube, but I used
some "industrial"
Goop to fix the dipstick tube base on my 2.1 it's holding up well so far.
This part had cracked where tube meets base.

https://picasaweb.google.com/musomuso/New1988Westy#6066066988907940850

Sent from my iPad, in the dark, in camp in Midway BC.

On Saturday, August 8, 2015, Stuart MacMillan <stuartmacm@gmail.com> wrote:

> Well, the latest "right before the trip" saga is that I checked the oil in
> my son's '87, and the end of the dipstick tube was broken off.  It appears
> to be a two piece assembly, with the part that goes into the engine case
> formerly attached to the flanged end of the rest of the tube by some
> method-solder, weld, glue, or magic.
>
>
>
> 1.       Any ideas how to fix this? I've just inserted the dipstick to keep
> it in place.
>
> 2.       Anyone have a tube lying around they would like to sell?  It's the
> same length as the one piece tube on my 1.9, so I think either would work,
> but it's possible that the hole in the case is larger on the 2.1, I didn't
> check since we are both heading out tomorrow AM.
>
>
>
> Thanks!
>
>
>
> Stuart, bitten by the Vanagon gods that don't seem to like me.
>


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>