Date:         Wed, 19 Aug 2015 10:29:42 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Re: Lighting stove before lighting fridge
Comments: To: jpalmer@MYMTS.NET
In-Reply-To:  <COL401-EAS27555431D4DEBA15AD54CB7B8670@phx.gbl>
Content-Type: text/plain; charset="us-ascii"

There is a slight flaw in your thinking Jeff. Letting the flame die before
shutting off only bleeds off the pressure, there is still gas in the line,
but at atmospheric pressure. Lines and valves with no leaks will be safe
either way, and  shutting the tank off is good practice.

And, the lines for the two appliances are separate, and are teed off the
regulator.  Lighting the stove does not clear "air" out of the fridge line,
but there should not be any air in it anyway.

Lighting the stove first only shows there is propane in the tank, which is
good to know, and gives you more confidence that the fridge will eventually
light!

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Jeff Palmer
Sent: Wednesday, August 19, 2015 9:46 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Lighting stove before lighting fridge

I believe this came up a few weeks back. Here's why I light the stove first
even if it indicates or responds to an incorrect condition.

When I turn off the fridge i do so first at the tank so that it burns off
gas in the line. Seems safer to me.  Then I turn off the dial. When i try to
light the stove for example after doing this I get 2-3 seconds of air before
it lights. I assume I would get the same air in the fridge gas line causing
difficulties in lighting. I find if I light the stove first it gets any air
out of the lines and the fridge starts more easily.

Just my 2.5 cents.
Jeff
85 Westfalia GL with generally working fridge

Sent from my iPhone=