Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2015, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 19 Aug 2015 11:46:56 -0500
Reply-To:     jpalmer@MYMTS.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff Palmer <jpalmer@MYMTS.NET>
Subject:      Re: Supporting the pop top to remove the frame
Comments: To: David Beierl <dbeierl@ATTGLOBAL.NET>
In-Reply-To:  <201508191235.t7JCZO1W013359@mail46c45.carrierzone.com>
Content-Type: text/plain; charset="us-ascii"

Why has someone not reprod this bar? Couldn't be too expensive?

Jeff

Sent from my iPhone

> On Aug 19, 2015, at 7:35 AM, David Beierl <dbeierl@ATTGLOBAL.NET> wrote: > > At 04:57 PM 8/14/2015, PB wrote: >> Ok - so in order to repair or replace my pop top frame mechanism without >> removing the poptop itself, I would need to support it. That's a simple >> concept, but I would like to know EXACTLY how! I'm envisioning a wooden >> jig something like THIS ONE >> <http://s74.photobucket.com/user/edtech2000/media/Pop%20Top%20Suppport.jpg.html>. >> I was thinking that an auto jack might go below the base, but never used >> one. > > You're working too hard. 2x4 in the middle, padded or secured as appropriate. > > FWIW, I discovered my cross-tube was almost sawn through three hours > before I had to leave to catch a ferry to Nova Scotia. I propped up > one side at a time, cut the tube short, turned solid ends from > bronze, glued them in with JB Weld, and was on the road in time. But > it's occurred to me since that I could have simply shoved in three > inches of the largest-diameter piece of round bar I could find that > fit inside the cross-tube and been fine for the trip and maybe forever. > > https://picasaweb.google.com/117189706757545167023/VanagonPopTopHingeTroubles?noredirect=1 > > Yours, > David


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.