At 12:52 AM 8/25/2015, Jeff Palmer wrote: >Is there anything holding the bar in there besides a screw on either >side? I was hoping not to have to remove the frame but it feels >pretty tight. Possibly because it's misaligned? > >Thanks >Jeff Jeff, it was a long time ago but no, there's no trick thing that's *supposed* to be holding the bar in. Alignment has to be perfect to get it out because the bearing edge gets trapped in the cut it's worn into the tube. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.