Hi folks, While under my van today I noticed my emergency break cable was loose and floppy. when I looked at it more carefully one side could be easily removed from the bracket. In fact it wasn’t seated correctly and that is how I noticed. I turned the nut in the center of the bracket so that the cable didn’t flop around any longer but not so much that it moved the two rear cables forward. Inside my van my emergency brake went from a max of four clicks up to three. As I can’t read the Bentley does it sound like I have this cable in a reasonable position now? the adjustment nut is currently just about centered on the threaded end of the rod coming from the front of the van. Eric Caron 85 GL auto Westfalia
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.