Date:         Tue, 25 Aug 2015 15:21:38 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Supporting the pop top to remove the frame
Comments: To: jpalmer@MYMTS.NET
In-Reply-To:  <COL401-EAS2835387724C0E95A6485C24B8610@phx.gbl>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 12:52 AM 8/25/2015, Jeff Palmer wrote:
>Is there anything holding the bar in there besides a screw on either
>side? I was hoping not to have to remove the frame but it feels
>pretty tight. Possibly because it's misaligned?
>
>Thanks
>Jeff

Jeff, it was a long time ago but no, there's no trick thing that's
*supposed* to be holding the bar in.  Alignment has to be perfect to
get it out because the bearing edge gets trapped in the cut it's worn
into the tube.

Yours,
David