If you are talking about the angle piece that goes over the edge of the Westy floor panel, I had one bent at a sheet metal shop out of 16 ga galvanized steel for $7. I drilled the holes and used 3/4" self-tapping screws like these: http://www.zoro.com/caddy-screw-self-tapping-12-in-pk100-sms8/i/G2844947/ Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Nick Feickert Sent: Tuesday, September 08, 2015 7:04 AM To: vanagon@GERRY.VANAGON.COM Subject: Sliding door threshold So I would hate to reinstall my beat sliding door threshold on my 85 Westy when the time comes. I don't see anyone providing OEM or aftermarket versions. I have the off white plastic one,( I guess there were metal ones too?). Any options here?? Nick Superflydisco |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.