Uh oh... The screw takes a whole bunch of turns to come out. Unless it broke off in the tumbler.:-( In which case, removal is not economically practical. You would be better off reshuffling the wafers in your new handle to match your key. If you are lucky, all the correct wafers / pins are there. If not, you can try to salvage them from your old lock. Or give them to a locksmith, if you can't do it yourself.
BenT sent from my electronic leash > On Sep 15, 2015, at 1:51 PM, Brett Ne <brettn777@GMAIL.COM> wrote: > > I need to replace the sliding door handle on my 82 because it's cracked. I > really want to reuse the old tumbler on the new handle so that I can have a > single key for all of the locks. I found the tiny set screw that holds the > tumbler in and can loosen it about 2 turns, but it won't come out all the > way and the tumbler shows no sign of wanting to part with the handle. Is > there a trick to this? Do I need to turn in the screw all the way in & > drill out the outer portion of the hole? > > > Brett > > -- > Brett in Portland, OR > "Albert" '82 VanaFox I4 Riviera |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.