Cut back the old wires to coil and re crimp new connectors. Just in case you are getting the situation of bad connection causing voltage and current drop during operation, even though the static voltage measurement checks out. Alistair > On Sep 19, 2015, at 5:12 PM, Angus Gordon <birdworks@GMAIL.COM> wrote: > > '86 syncro > > I'm looking to solve a weak spark problem. Battery voltage is present at the coil (D15 power currently coming from G2). > Coil has been swapped. > New dist. cap and coil wire (swapped). > Grounds re-cleaned below coil. > > Am I correct that the coil ground is through ECU pin 19? Under the coil? > My brain is as weak as my spark right now. > > Thanks for any help, > > Angus |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.