I blew air into the upper coolant bottle and out the disconnected hose. Stephen mobile > On Sep 15, 2015, at 7:08 PM, Stephen Grisanti <bike2vcu@yahoo.com> wrote: > > I removed the lower radiator hose and used a small air compressor and chuck wrapped in a shop towel to blow the coolant into a catch pan. Could have been messier than it was. > > Stephen > > mobile > >> On Sep 15, 2015, at 1:30 PM, John Rodgers <jrodgers113@GMAIL.COM> wrote: >> >> I need to drain some/all coolant in order to replace hoses on oil cooler >> and coolant pump. From a practical do-it-yourself point of view (picture >> laying on your back under the van in the slightly slanted driveway) what >> would be the best approach. Can't move the vehicle from where it sits. >> >> John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.