Date:         Tue, 15 Sep 2015 09:37:29 -0700
Reply-To:     Pat Spragge/RFAN <Pat.Spragge@RFAN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pat Spragge/RFAN <Pat.Spragge@RFAN.COM>
Subject:      Re: Starter hesitation
Comments: To: Stuart MacMillan <stuartmacm@GMAIL.COM>
In-Reply-To:  <095801d0efd4$578fc710$06af5530$@gmail.com>
Content-Type: text/plain; charset="US-ASCII"

Check the grounds...do a voltage drop check on the starter as it may not
be seeing the full 12+V...or could be the case that Stuart stated


Patrick



From:   Stuart MacMillan <stuartmacm@GMAIL.COM>
To:     vanagon@GERRY.VANAGON.COM
Date:   09/15/2015 09:34 AM
Subject:        Re: Starter hesitation
Sent by:        Vanagon Mailing List <vanagon@gerry.vanagon.com>



You can try a relay (get a sealed one, like T3's to prevent accidental
shorting), but that didn't work for me.  These starters are weak to begin
with, and the rebuilt units are junk too (garbage in, garbage out). This
is the real fix:
http://www.gowesty.com/ec_view_details.php?id=23528&category_id=&category_parent_id=


The current through the ignition switch isn't all that huge--a pulse of
current to throw the solenoid, and a much smaller amount to keep it
engaged while cranking.  The solenoid itself makes the high current
connection from the battery directly to the starter.  Often the solenoid
is the problem, or it's a combination of both parts being "weak".

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Rick Cooper
Sent: Tuesday, September 15, 2015 9:10 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Starter hesitation

Since buying it earlier this year, the starter on my 87 Westy hesitates
when I turn turn the ignition to start.  There's an initial 'umph' --
starter gives kind of a push, then it stops for 1/4 to 1/2 a second before
it starts again and, this time, carries on to start the engine.  Have I
got
a bad connection and, if so, where might it be?  I've heard of installing
a
relay somewhere in the starter circuit -- would that help?  What kind of
relay do I need and where in the circuit would it go?

Thanks for any pointers,

Rick