Date: Fri, 25 Sep 2015 23:15:15 +0000
Reply-To: Richard Koerner <rjkinpb@SBCGLOBAL.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Richard Koerner <rjkinpb@SBCGLOBAL.NET>
Subject: Re: Help under the dash
In-Reply-To: <5605D2FC.5080307@turbovans.com>
Content-Type: text/plain; charset=UTF-8
Removing and replacing the dash is NOT hard at all...just time-consuming. I followed the tips from Ben's Place in Canada Removing the dash
| |
| | | | | | | |
| Removing the dashHere, you seen all main screws to be remove. You can remove those screws later if you want, but me, i removed them now, 2 each side + all SMALL one ove... |
| |
| View on benplace.com | Preview by Yahoo |
| |
| |
Just work leisurely, and maybe have an assistant when finally ready to lift out the dash. And then again when installing; not heavy, just a little awkward. I didn't have an assistant, and it still all worked out fine.
I thought my clutch pedal hole was ovaled (had a clicking); turns out it was not, perfectly round and nice. So I just lubed it up, and everything nearby that moves. But most of my driving is long distance with minimal clutch usage; your situation might be different and indeed the hole is oval or nearly gone. Anyway, don't be afraid of removing the dash....I know nothing, have crappy tools, and it was no problem at all. Allow 2 days at least if working leisurely.
RichSan Diego
From: "SDF ( aka ;jim lahey' - Scott )" <scottdaniel@TURBOVANS.COM>
To: vanagon@GERRY.VANAGON.COM
Sent: Friday, September 25, 2015 4:04 PM
Subject: Re: Help under the dash
it may not be necessary to remove the whole dash.
Last pedal assembly I did ...I left the dash in ..
it was a very, very tight fit getting the pedal assy out ..but it did
come out.
On 9/25/2015 12:49 PM, Jim Felder wrote:
> It would be a good time to add some kind of sound deadening under there.
>
> Jim
>
> On Fri, Sep 25, 2015 at 5:38 PM Jaime Forero <jforero@sbcglobal.net> wrote:
>
>> Folks, I am getting ready to remove the dash so I can get to the
>> clutch/brake pedal assembly. I will be removing and replacing the clutch
>> pedal assy with one I got from Westy. While I have the dash removed what
>> else should I be looking to replace or inspect? I replaced the heater fan
>> unit a couple of years ago so I don't think I will be going there.
>>
>> Cheers
>>
>> ________________________
>>
>> Jaime Forero
>>
>> <mailto:jaime.e.forero@nasa.gov> jforero@sbcglobal.net
>>
>> Siempre Adelante !!!!
>>
>> ВСЕГДА ВПЕ�ЁД!
>>
>>
>>
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
|