Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2015, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 24 Sep 2015 10:12:13 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Power Door Locks: Key Won't Turn Pass. Side Door Lock.
Comments: To: David Beierl <dbeierl@attglobal.net>
In-Reply-To:  <201509240423.t8O4NRgd024104@mail109c45.carrierzone.com>
Content-Type: text/plain; charset=UTF-8

Thanks for that explanation. I had a rough idea of how it all worked but that's helpful.

Yes, it's no trouble pulling the panel but since the exact same issue happened before, and was solved by removing and cleaning the actuator, I was curious if there's a given part in the actuator that typically wears causing the actuator to bind internally. It would be nice to repair what I have as opposed to spending more money! ;)

Neil.

On Wed, Sep 23, 2015 at 9:23 PM, David Beierl <dbeierl@attglobal.net> wrote:

At 11:02 PM 9/23/2015, Neil N wrote: >

> The key won't turn the passenger side door lock. >> Something is binding. I'm about certain it's within the actuator. >> > > > Pull the panel and find out. You're going to be in there anyway, so why > waste time supposing? > > The actuator has two neutral positions where it is supposed to stop, at > 180-degree positions of the big gear. It stops there because the switch on > the bottom of the gear removes the connection to whichever wire is powering > it (yellow or white), and applies a connection to the other one instead. > If the other wire also has power it runs for another half-revolution, > recursively. > > Just before the gear gets to either stopping point, the cam that's pushing > on the actuator rod runs past its end and the rod is now free to move in > either direction. So if the motor just pushed it out, now you can push it > back in -- and on the front doors, when you do so it applies power to the > motor which makes the gear (and all the other motors) chase it to catch up. > > Yrs, > d >

-- Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.