At 02:57 PM 9/30/2015, Harold Teer wrote: >Or any other thoughts would be appreciated. Based on two old OEM senders and a recent Bus Depot aftermarket sender, with 10.0 volt input to a gauge that closely matches two others I have, needle touching the left side of LED represents about 90/90/95C. Needle in the middle is about 100/100/105C. Needle touching the right side of LED is about 112/--/118C. I think the recent Bus Depot sender is off and the OEM ones are correct. Yrs, d
>Harold > >Harold Teer >1991 Westy -- VANGAUX >Harrisonburg, VA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.