The new hoses will likely tell you where they fit when you try to hook everything up. The flow direction through the cooler has no effect on cooling (just think about this for a minute). Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of John Rodgers Sent: Thursday, October 01, 2015 2:55 PM To: vanagon@GERRY.VANAGON.COM Subject: Oil cooler installation 2.1 L WBX In putting this back on, I need to know the hose hookup to get the water flow in the right direction. There is a feed pipe that comes directly off the water pump. With the cooler in place, which of the cooler pipe stubs does that direct water pump pipe hook to? I've new short hoses for this but had to cut the old hoses off, and no have no guide for proper hookup. Many thanks for the solution! John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.