Mostly its about getting those hoses on. Thanks, John On Oct 5, 2015 01:16, "SDF ( aka ;jim lahey' - Scott )" < scottdaniel@turbovans.com> wrote: > I would install the oil cooler, and snug down the nut that holds it a > little .. > at first, > then get the hoses on so there's no tension or stress on them, > and after those are in place perfectly, tighten the 27mm nut to final > torque. > > if that's what you mean. > just do nice careful work. > scott > > On 10/4/2015 4:49 PM, John Rodgers wrote: > > The water pump and adjoining plumbing is all in place. Just wondering if > there is an order for reinstalling the oil cooler that would make it > easier. > > John > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.