Date:         Thu, 1 Oct 2015 19:15:20 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Re: Oil cooler installation 2.1 L WBX
Comments: To: John Rodgers <jrodgers113@GMAIL.COM>
In-Reply-To:  <CA+az7_49WCswSm1vNyh3BCfPBaGeqFOJ2HBN41TmAbsk_b7WUQ@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

The new hoses will likely tell you where they fit when you try to hook everything up. The flow direction through the cooler has no effect on cooling (just think about this for a minute).

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of John Rodgers
Sent: Thursday, October 01, 2015 2:55 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Oil cooler installation 2.1 L WBX

In putting this back on, I need to know the hose hookup to get the water flow in the right direction. There is a feed pipe that comes directly off the water pump. With the cooler in place, which of the cooler pipe stubs does that direct water pump pipe hook to? I've new short hoses for this but had to cut the old hoses off, and no have no guide for proper hookup.

Many thanks for the solution!

John