Date:         Fri, 2 Oct 2015 18:43:13 -0500
Reply-To:     mcneely4@COX.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave Mcneely <mcneely4@COX.NET>
Subject:      Re: GoWesty rear hatch and side screen installation help.
Comments: To: Kenneth O'Connor <kenneth.oconnor@GMAIL.COM>
In-Reply-To:  <6784D5F6-75C1-40C6-A489-BAF70EA2D941@gmail.com>
Content-Type: text/plain; charset=utf-8

The GoWesty instructions were explicit enough when I installed mine.  However, mine is a camper.  The screen was factory on the rear, so snaps are already in place.  And maybe on a camper, the details around the door and seats differ somewhat?  At any rate, the side door screen does not fit well enough to serve its purpose very well.  Bugs can get in around it.  I think that would be true regardless of the exact placement of the snaps.  The vents above the door interfere, as does the seat belt for the front seat, and the fire extinguisher bracket.  There seems to be no way to place the snaps so this would not be true.  But, maybe there are some dumb bugs, and the number getting in is less than with no screen at all.  mcneely

---- Kenneth O'Connor <kenneth.oconnor@GMAIL.COM> wrote:
> Hello all,
>
> I purchased rear hatch and side door screens from GoWesty. I've been using carpenters clamps to hold them in place because I'm not sure where the snaps are supposed to go.
>
> If any of you have successfully installed these, could you provide a couple of photos of the snap locations?
>
> I have an 87 tin top.
>
> Sent from my iPhone

--
David McNeely