Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2015, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 2 Oct 2015 14:56:59 -0400
Reply-To:     Dennis Jowell <dennisjowell@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Jowell <dennisjowell@GMAIL.COM>
Subject:      Re: How to remove O2 sensor
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY405-EAS113622F53573F0F70A6571CA04B0@phx.gbl>
Content-Type: text/plain; charset=us-ascii

Dennis, The "tool" from NAPA -"Spark plug opening thread chaser" is marked on one end 18 MM other end is 14 MM. I guess this is the correct tool I've had for several years now. Just forgot about it. Hopefully this will work.

Dennis

Dennis Jowell Scotch Hollow Farm Newbury, Vermont

> On Oct 2, 2015, at 2:44 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> > The O2 sensor thread is the same as an "18mm" spark plug like in older > Fords. The Vanagon spark plug is a 14mm thread. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of

> Dennis Jowell > Sent: Friday, October 02, 2015 2:44 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: How to remove O2 sensor > > Rich > Is the thread on the O2 sensor the same as a spark plug? Looking through my > tools I did find a spark plug thread chaser. I can't remember if I used it

> for the sensor or not. > I think I did because I never did anything with any spark plug threads on my > Westy. Can you confirm that the threads are the same? > > Dennis > > > Dennis Jowell > Scotch Hollow Farm > Newbury, Vermont > > >> On Oct 2, 2015, at 10:16 AM, Richard Koller <brvkoller@gmail.com> wrote: >> >> Dennis, >> I forgot to mention that I had to restore the threads in the O2 bung with

> a thread chaser ( if my memory holds, I used a spark plug thread chaser ) > after removing the sensor. I've done this a couple times and it has worked

> out each time and I was able to reuse the O2 sensor with no problem. >> Rick >> >>> On Fri, Oct 2, 2015 at 9:43 AM, Richard Koller <brvkoller@gmail.com> > wrote: >>> Dennis, >>> I had this same problem and I heated the cat at the junction where the O2 > sensor screws in with MAPP gas. Then quickly slipped my 22mm box end over > the disconnected sensor wires and was able to break it free. It would be > better as others have said to use the dedicated O2 sensor socket. Heat was

> essential however in my case. >>> Good luck. >>> Rick Koller >>> >>>> On Thu, Oct 1, 2015 at 12:37 PM, Dennis Jowell <dennisjowell@gmail.com>

> wrote: >>>> I just started to replace my O2 sensor on my 2.2 wbx. No,luck using my > wrenches . Everything is rusted together. The catalytic converter is only > about a year old. Is there a better way to remove the sensor? Should I use

> my touch to heat the sensor ? Any ideas would be great. I might get to > Quebec yet just have to get this done. >>>> >>>> Regards, >>>> Dennis >>>> >>>> Dennis Jowell >>>> Scotch Hollow Farm >>>> Newbury, Vermont >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.