Date: Sun, 25 Oct 2015 08:23:37 -0700
Reply-To: Jim Arnott <jrasite@EONI.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jim Arnott <jrasite@EONI.COM>
Subject: Re: I-4 conversion general info
In-Reply-To: <E6BCC7B6-DBBA-4459-94D6-B57DF2C00495@eoni.com>
Content-Type: text/plain; charset=utf-8
And pilot bearing! Don’t forget the pilot bearing in the flywheel.
Jim
> On Oct 25, 2015, at 8:18 AM, Jim Arnott <jrasite@EONI.COM> wrote:
>
> Rob, Stephen et al;
>
> I’ve done it. ’84 Adventurewagen with a ’97 Jetta ABA motor. Absolutely love it. It’s been a couple years now and it still puts a smile on my face when I press the loud pedal. It’s nice to be able to pass easily on the two lane highways around eastern Oregon. It’s nice to be able to go over passes at 60-70 MPH. (Redline for the motor is further to the right than the Vanagon tach goes. (I hit the rev limiter in 2nd once. At about 50.)) Fuel economy improved about 3 mpg.
>
> What Stephen says is correct.
>
> Off the top of my head:
> ’83 (or later) carrier bars & engine mounts
> Diesel bell housing & shield, starter, input shaft, clutch & flywheel
> Oil pan & pump (with pickup)
> ’83 or later dipstick & tube
> Windage tray (stock Jetta from FLAPS)
> VR6 waterpump pulley
> Jetta coolant bottle
> A friend at the FLAPS to let you pick through the hose collection for the right ones
> A good radiator shop to build the connectors for hoses attaching to hoses
> Metal engine cover
> Engine management system (EMS) of your choice. (I used the Jetta’s Motronic system)
> Miscellaneous bracketry and tubing to deal with ancillaries.
> ’98 Ford Focus air cleaner (paper element readily available)
> $500 worth of good hotrod muffler shop with resident artist that can follow instructions
> A couple of good friends to put it all together for you. (Thanks again Matthew & Jason)
>
> You can also swap out the crossflow head for a counterflow and keep it all below the deck. Doing so allows the use of the Digifant EMS and makes it an easier swap all around. It also raises the compression ratio a point or so (I’m told) but with the right EMS, you’ll have a knock sensor so it’s not really a concern. That’s not what I did. You want to do that, talk to Don Hanson or Robert Keizer.
>
> Pictures from start to finish here: https://picasaweb.google.com/104201992525683280598/FollyABAInstall
>
> Jim
|