I used JB Weld to inbed a heavy wire that had two legs standing out, just as the two plastic ones were. Now they are a little adjustable and real strong. Zoltan -----Original Message----- From: Jim Felder Sent: Thursday, November 12, 2015 3:35 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: Electric window switch, broken tabs I took some inch-long-or so number eight bolts from the hardware store, drilled and tapped straight into the plastic body from the back and screwed them in. The heads catch on the inside of the door panel. They never gave me any trouble. Jim On Wed, Nov 11, 2015 at 9:16 PM Dan N <dn92610@gmail.com> wrote: > thanks a lot.... > > I was looking for long time something fix plastic besides the crazy glue > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.