|
A clever dealer service tech a while back used a cleverly bent paperclip to secure one of mine. From the outside it fooled me. :) Steven 91 Westy On Thu, Nov 12, 2015 at 6:41 PM, thewestyman <zolo@foxinternet.net> wrote: > I used JB Weld to inbed a heavy wire that had two legs standing out, just > as > the two plastic ones were. Now they are a little adjustable and real > strong. > Zoltan > > -----Original Message----- > From: Jim Felder > Sent: Thursday, November 12, 2015 3:35 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Electric window switch, broken tabs > > I took some inch-long-or so number eight bolts from the hardware store, > drilled and tapped straight into the plastic body from the back and screwed > them in. The heads catch on the inside of the door panel. They never gave > me any trouble. > > Jim > > On Wed, Nov 11, 2015 at 9:16 PM Dan N <dn92610@gmail.com> wrote: > > thanks a lot.... >> >> I was looking for long time something fix plastic besides the crazy glue >> >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.