Date:         Thu, 12 Nov 2015 18:41:46 -0800
Reply-To:     thewestyman <zolo@FOXINTERNET.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         thewestyman <zolo@FOXINTERNET.NET>
Subject:      Re: Electric window switch, broken tabs
Comments: To: Jim Felder <jim.felder@GMAIL.COM>
In-Reply-To:  <CAFnDXk093BVZwXR-nfVg-MeAWqyLynRgDbS8nR2JCdT_1t=xAg@mail.gmail.com>
Content-Type: text/plain; format=flowed; charset="UTF-8"; reply-type=original

I used JB Weld to inbed a heavy wire that had two legs standing out, just as
the two plastic ones were.  Now they are a little adjustable and real
strong.
Zoltan

-----Original Message-----
From: Jim Felder
Sent: Thursday, November 12, 2015 3:35 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Electric window switch, broken tabs

I took some inch-long-or so number eight bolts from the hardware store,
drilled and tapped straight into the plastic body from the back and screwed
them in. The heads catch on the inside of the door panel. They never gave
me any trouble.

Jim

On Wed, Nov 11, 2015 at 9:16 PM Dan N <dn92610@gmail.com> wrote:

> thanks a lot....
>
> I was looking for long time something fix plastic besides the crazy glue
>