Date:         Sat, 19 Dec 2015 21:35:48 -0800
Reply-To:     Pat Spragge/RFAN <Pat.Spragge@RFAN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pat Spragge/RFAN <Pat.Spragge@RFAN.COM>
Subject:      Re: R&R engine mounts on 1989 Westfalia
Comments: To: Neil N <musomuso@GMAIL.COM>
In-Reply-To:  <CAB2RwfjZ_gjNQk-=6nt2NQLmoDO4EP5RHKrN0pE9_zar4bnZ5Q@mail.gmail.com>
Content-type: text/plain; charset=US-ASCII

Yes I recall you mentioning that earlier. My new ones are meyles as well.
I guess there's not much I can do about that other than some fatmat or
other sound deadening mat'l.
I have at least one broken mount and maybe more so have to do this.
Thx again Neil
Pat



> On Dec 19, 2015, at 7:54 PM, Neil N <musomuso@GMAIL.COM> wrote:
>
> you're welcome
> btw. Right after my new (Meyle?) mounts were installed, I noticed
> more engine noise, or vibration noise, in the cab.
> (3/4 of the old mounts were still ok.)
> I loosened the mount fasteners, jostled the engine around, retightened
> fasteners but that made little to no difference.
> But after putting some miles on the bus,
> there seems to be less of that noise.
>
> Neil.
>
>
> On 12/19/15, Pat Spragge/RFAN <Pat.Spragge@rfan.com> wrote:
> > Neil & Dan
> >
> > Thanks for the good info.
> --
> Neil n
>
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>
> 1981 Westfalia "Jaco" Images, technical
<http://tubaneil.googlepages.com/>
>
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>