Date:         Mon, 28 Dec 2015 17:06:50 -0800
Reply-To:     Dick Wong <sailingfc@DSLEXTREME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dick Wong <sailingfc@DSLEXTREME.COM>
Subject:      Re: Noisy speedo
Comments: To: Gene P <olgreywoof@GMAIL.COM>
In-Reply-To:  <CAKtA5HaRLGroEJYVZxRCR5B=svmQjVJHJq+CX87FACMC48yimw@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Thanks Gene.

Going through the cable hole would have been my first attempt.  Thanks for confirming it's doable and it yielded good results.

-Dick-


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Gene P
Sent: Monday, December 28, 2015 12:19 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Noisy speedo

Dick Wong wrote:
"That's a lot more than I ever want to get into the speedo."

"So if I just want to add some "lube" without the dismantling you did, where should I start? I willing to at least take the speedo assembly out of the instrument pod."

***
If you want to start minimalist (cheap and easy), just pull the instrument cluster and flip it over, not the speedo out of the pod.  Then drip maybe five or six drops of Super Lube into the little hole the cable goes into.
I did this a year ago and not a sound since.  Obviously not as precise or thorough as others are suggesting, but a quick and easy first try.  Worked for me.

Dennis says Super Lube and at 5 bucks, why not?  I strongly suggest the bottle, not a spray can.  Spraying into a confined hole tends to blow back and also lubricate your eyes, effective but painful.  How would I know that?
http://www.amazon.com/Super-Lube-51004-Synthetic-Viscosity/dp/B000UKUHXK/ref=sr_1_2?ie=UTF8&qid=1451332998&sr=8-2&keywords=super+lube

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6176 / Virus Database: 4489/11273 - Release Date: 12/28/15