Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2015, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 29 Dec 2015 07:31:20 -0800
Reply-To:     Neil2 <vidublu@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil2 <vidublu@GMAIL.COM>
Subject:      Re: Lysol Foaming Bathroom Cleaner cleans Vanagons
Comments: To: John Rodgers <jrodgers113@gmail.com>
In-Reply-To:  <CA+az7_7RCWu-P4fOcuVGG+FhTDMPoGo_Xmh-xHQ=bqPwGh_CQw@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

Not sure if this is an aside but seems related. Forgive me if not.

I used velcro to attach my Sprinter's privacy screens (Phizer Awning material) to the rubber window gaskets. Removed/Replaced them on the windows as needed, mostly seasonal with nary a problem.. The rubber was new, clean, only a year old when first installed. With my '90 Vanagon I had to clean the rubber AND use rubber cement btwn the velcro and the gasket and still on one lower, horizontal window edge it just came right off when I removed the screen last week. I don't know if the age, composition or cleanliness of the rubber is the issue or whether velcro is different. The angles are a bit harsher in the Vanagon perhaps but not enough to warrant the trouble I'm having.

Any feedback would be greatly appreciated. Thanks!

On Mon, Dec 28, 2015 at 10:20 PM, John Rodgers <jrodgers113@gmail.com> wrote:

> This was a real surprise. My '88 GL has gotten really dirty with pecan tree > drippings and other nasty city dirt and soot, and I was considering how > much effort it was going to be to clean all that off and spruce it up a > bit, and clean the rubber on the windows. My son came out, looked at it, > and said, "Here, try this!" He handed me a can of Lysol spray on foam bath > cleaner and told me spray it on and then wait until the foaming stops. I > sprayed a small section in an inconspicuous place and after the foaming > stopped, wiped it of with a dry rag. Did I ever get a surprise. The > dirt,soot, and street crud just wiped off. No rubbing with a brush, no > flooding with water, nothing. Spray on, wipe off. Paint looked as good as > new for the most part. Window rubber the same way. It's so easy. Try it. > Use it on the inside on the dash as well. I haven't done it yet, it rained > today, but I would recommend hosing off the outside after doing this and > then app,ying a coat of wax, for the dash and other interior area suggest > aterward wiping with a damp/wet cloth. > > Also apply the method to glass as well. > > I use a plumber's silicone grease from Home Depot on the rubber afterwards. > Rub it in. > > John >

-- Neil2 '82 Diesel Westfalia (Ducky) '86 Vanagon/Westfalia Wannabe (SaVannah) '08 170" 2500 Mega Roof Dodge Sprinter (Moby) '90 Westfalia Subagon Fulltiming since August 2008 Nunquam Pendite Divendium


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.