For the spindles some 84s had the power steering. I believe there is a split in 85 where the inner diameter of the outer bearing was changed. So for the early spindles you need to match the tie rod connection and the axle. For 86 and later the only difference is for the presence of power steering. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Felder Sent: Thursday, January 7, 2016 12:18 PM To: vanagon@GERRY.VANAGON.COM Subject: Need 83-84 era driver's spindle Not me, but the customer of a local shop. I don't have any spares for this, the early suspension version that I believe changed to all cast iron and power steering features in 85 or 86. Anyone? Thanks, Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.