Date: Fri, 1 Jan 2016 01:10:10 -0800
Reply-To: Dick Wong <sailingfc@DSLEXTREME.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dick Wong <sailingfc@DSLEXTREME.COM>
Subject: Re: Noisy speedo
In-Reply-To: <63FF433B-59FF-4841-A9D8-EE140FE48B6B@gmail.com>
Content-Type: text/plain; charset="UTF-8"
First drive in the morning. The sound went away as the heater warmed the inside and I drove a few minutes.
http://tinyurl.com/hk6nb5j
OR
https://youtu.be/atO8e1WzQ5M
-Dick-
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Felder
Sent: Tuesday, December 29, 2015 7:57 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Noisy speedo
Air tool oil is going into a hot/warm use environment inside that tool with compressed air. How will it work to lubricate parts of a car that get very very cold during part of the year?
Jim
Sent from my iPad
> On Dec 29, 2015, at 9:49 PM, Don Hanson <dhanson928@gmail.com> wrote:
>
> I am no chemist but I am an avid, almost everyday cyclist, logging an average of ~7-8k miles per year now for about 30 yrs, many of those miles using air tool oil on my derailleurs, my shifters, my brake pivots, etc etc.... I am also a carpenter and have used nail-guns for many many years, lubing them daily with about 5 drops of oil as per manufactures specs...My senco guns are about 20yrs old now and have never had any dirt related problems....
> I used to sometimes use expensive stuff like triflow or bicycle-specific lubes, but I began with the tool oil, one day when it occurred to me that Triflow was REALLY expensive! and never switched back....
>
>> On Tue, Dec 29, 2015 at 7:38 PM, Jim Felder <jim.felder@gmail.com> wrote:
>> Great idea if there is no downside. I always have plenty of it. Anybody else using air tool oil? Is it different/better than sewing machine oil? I mentioned sewing machine grease earlier, which is different. Sewing machine oil, a very light pure oil used for instruments and of course sewing machines. But tool oil is much cheaper and you can get it anywhere. Hmmmm. Anyone know for sure?
>>
>> Jim
>>
>>
>>> On Tuesday, December 29, 2015, Don Hanson <dhanson928@gmail.com> wrote:
>>> For use on precision equipment like bicycle gearing, air tool oil
>>> is what I use...Used that on my 84 speedo last fall, this year, I
>>> ain't driving it anymore till I get the tranny redone...
>>>
>>> Air tool oil...Hardware store, Home Depot, etc etc...great stuff
>>> that has an additive to keep it from gathering crud....and inexpensive...
>>>
>>> On Tue, Dec 29, 2015 at 8:36 AM, Dick Wong <sailingfc@dslextreme.com> wrote:
>>>
>>> > I ve heard of Lubriplate. Any idea which one? They have over 30
>>> > greases in there multi-purpose category.
>>> >
>>> >
>>> >
>>> > -Dick-
>>> >
>>> >
>>> >
>>> > From: William Monk [mailto:billmonk@gmail.com]
>>> > Sent: Tuesday, December 29, 2015 3:56 AM
>>> > To: Dick Wong
>>> > Cc: vanagon@GERRY.VANAGON.COM
>>> > Subject: Re: Noisy speedo
>>> >
>>> >
>>> >
>>> > Lubriprate if I recall the name correctly. Comes in little silver
>>> > tubes with black printing. Good stuff.
>>> >
>>> > Bill
>>> >
>>> > _____
>>> >
>>> > No virus found in this message.
>>> > Checked by AVG - www.avg.com
>>> > Version: 2015.0.6176 / Virus Database: 4489/11279 - Release Date:
>>> > 12/29/15
>>> >
>
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6176 / Virus Database: 4489/11282 - Release Date: 12/29/15
|