I've never been able to get at that bolt without removing the bumper, but you might get lucky! My '85 as rubber strips covering the bumper bolts, so that means replacing at least half of the clips when I pull them off. Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Felder Sent: Monday, January 04, 2016 4:15 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Bumper end cap how to? Pry out the plug that conceals the phillips screw into the body panel. From the end or from the bottom you could be able to get a 13mm socket on the carriage bolt from the back. Jim On Mon, Jan 4, 2016 at 5:45 PM Tyler Hardison <tyler@seraph-net.net> wrote: > Does anyone have a handy how to for the front bumper end caps? I can't > seem to figure out how to get to the large carriage bolt out... > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.