Yes I am planning on replacing all of those additional parts...key concern at this time are the lower control arm bushings. This is an 89 with the cast arms and also is a California vehicle and still is. Very solid...absolutely no rust anywhere. Dennis ...not sure I understand what you mean here > The original lower control arm attachments are a mount, not a bushing
Patrick Spragge > On Feb 2, 2016, at 5:11 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote: > > The original lower control arm attachments are a mount, not a bushing. And > they are a poor design and installation requires some tricks. However, if > you need those I guarantee that you also need the radius rod mounts and you > may be in for a surprise that the strut rods are damaged and you may even > need some welding repair on the chassis. Time to do it all. > > The T3 radius rod mounts and LCA bushings are the "bomb". Simply great stuff > and worth every penny. Get the extra grease, you will need it to do this > right. Consider the sway bar mounts and if needed go for the upper control > arm bushings. To save some coin you could consider the GoWesty units for > these. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Patrick Spragge > Sent: Tuesday, February 02, 2016 3:51 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Lower control arm bushing r&r on 89 westy > > I replaced my 14" rims and 185r tires with 16" and 215s and doing that > revealed that I need new lower control arm bushings. I'm not sure I'm up for > doing this myself because of the springs. Does anyone have any experience > changing these out? Can they be done without removing the arm from the > vehicle? How would a shop do this? I will probably replace them with the > poly bushings from T3 since they would go in much easier than the 1 piece > rubber ones. > > Patrick Spragge > >> On Feb 2, 2016, at 12:31 PM, BenT <syncro@GMAIL.COM> wrote: >> >> Let's not forget the value of labor. >> Bostig, DIY. SC in question, turnkey. >> >> BenT >> sent from my electronic leash >> >>> On Feb 2, 2016, at 10:58 AM, Mike Saint-Amour > <mikesaintamour@HOTMAIL.COM> wrote: >>> >>> For that kind of money you could do two bostig conversions, or one new > zetec motor with the turbo, know everything about your rig and have money to > go travel. That's some serious cash. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.