Good lifters filled with oil will not compress quickly. After adjustment you have to wait sometime and them they will final adjust after the engine starts. The air cooled engines not only burn valves but they can have the valve seats come loose. Dennis Sent from my Windows 10 phone From: thewestyman<mailto:zolo@FOXINTERNET.NET> Sent: Saturday, February 27, 2016 3:39 AM To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@GERRY.VANAGON.COM> Subject: Lifters don't compress ... Hi to all, This is an air-cooled engine, 2 liter, 1982 model. I seem to have a problem with my lifters not getting compressed. I can’t tell why. I can think of the oil pressure to be too high. Took the ‘oil pressure relief valve’ out and can’t find anything wrong. Had to use the lifters without any turn on it. Now the engine is out because I think I have burnt valves. Any of you had such a problem before? What could be amiss? Best regards to all, Zoltan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.