Date:         Sun, 6 Mar 2016 10:07:44 -0800
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Fuel injector cleaner: harm O2 sensor?
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY405-EAS7152A98C50520F0D46CC2AA0B00@phx.gbl>
Content-Type: text/plain; charset=UTF-8

 My 88 westy 2.1 wbx still has that shield. I'd read that an o2 sensor
(references?) outside air through small holes at wires into sensor body but
great detail info on that clip shield re maintaining heat!
Not to clutter this list with yet more Jetta swap centric info, but on my
latest iteration of hacked in exhaust, the o2 sensor is mounted at the
exhaust manifold. That manifold is from a New Beetle or so I was told.
Image:
https://lh3.googleusercontent.com/-NA1H1M874ok/TtbekSSxTcI/AAAAAAAAFas/5Mn3VlYFcMw/s640-Ic42/ExhaustManifold1.jpg

Neil.

On Sunday, March 6, 2016, Dennis Haynes <d23haynes57@hotmail.com
<javascript:_e(%7B%7D,'cvml','d23haynes57@hotmail.com');>> wrote:

> I don’t see that as causing an O2 sensor fault. If the O2 sensor is
> mounted as it was in the 2.1L Vanagons it is susceptible to being fouled
> from road spray. In addition they sometimes have difficulty staying hot
> enough to work properly. From VW there was a clip on shield that tried to
> help with both of those issues.
>
> Dennis
>
>
>
>
>

-- 
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>