Hi Guys, because this mod never had much demand (so I didnĀ“t sell anything) and also because no machine shop was willing to manufacture gears for a reasonable price, I decided to release my Audi-Tiptronic reversal set into the public domain. Anyone can now download the zip mentioned below, and I would be happy if this is spread through the community. http://www.v6bus.de/Tiptronik.zip If any Vanagon converted to tiptronic successfully, praise me to at least show some public domain spirit! Financial donations also accepted :-) readme.txt only in german yet. Basic info in there: CV joint adapter works with Porsche 924 shafts on one side, needs another 10mm spacer on the other (I hid that on the outer CV joint). Folder 1 shows my setup: 40mm teeth on gears, lowered holes for stock gearbox studs. Folder 2 show new setup: 38mm teeth on gears, no lowered holes for stock gearbox studs. Stay tuned for Audi Brake Adapter data...maybe
Regards Raimund |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.