On 7 Jul , 2012, at 10:52 PM, neil n wrote: > I doubt that's the case though. Actually, That is one of the 1st things I'd suspect ~ If one is not Vanagon FuelTankDrop Savvy so as to know that the CrossOverPipe is attached to the Underside of the body by a HoseHanger, it is QuitePossible to Pull one of the CrossOver to Tank Fittings out of the Tank or even Break 1 ~ Those Fittings can be Seen or Felt by Looking/Reaching in through the WheelWell behind the tire over the Frame ~ With My long Skinny Arms & Hands I have actually performed a Replacement of a Few C'O's & Grommets from the WheelWells with out dropping the Tank ~ ORR~ DeanB |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.