Date:         Sun, 3 Apr 2016 22:43:17 -0400
Reply-To:     T Collins <tonycollin@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         T Collins <tonycollin@GMAIL.COM>
Subject:      Re: Retrofitting 3 point harness into 85 vanagon
Comments: To: Jeff Palmer <jpalmer@mymts.net>
In-Reply-To:  <BLU436-SMTP835180C2C50AF71D572ED4B89D0@phx.gbl>
Content-Type: text/plain; charset=UTF-8

Does anyone have the part numbers for the rear shoulder belts for 89+ 7
passenger vanagons?

Thanks
Tony

On Sun, Apr 3, 2016 at 10:06 PM, Jeff Palmer <jpalmer@mymts.net> wrote:

> When I added 3 point belts to my 85 Westfalia I bought them from Go
> Westy.  The holes were predrilled but the reel did stick out.  Not sure if
> different years are drilled differently.  Cutting through the cabinet was a
> pain but that wouldn’t be necessary in a bus.
>
> Jeff
>
> > On Apr 3, 2016, at 5:17 PM, JordanVw@AOL.COM wrote:
> >
> > In a message dated 4/3/2016 6:07:49 P.M. Eastern Daylight Time,
> > stuartmacm@GMAIL.COM writes:
> >
> > installed this one from Go Westy in my son's '87 Westy for  my
> > granddaughter and friend. Works with any bus on the rear seat:
> > http://www.gowesty.com/product-details.php?v=&id=3218
> >
> >
> >
> >
> >
> >
> > i have a factory one for sale..  the one that go-westy sells is not  like
> > the factory one..  the one go-westy sells the reel sticks out from the
> wall
> > and is not concealed.   the factory one the reel is concealed  behind the
> > wall panel and uses holes that are already in your van so you dont  have
> to
> > drill anything.
>