Date:         Sat, 9 Apr 2016 23:02:37 -0400
Reply-To:     Marc Perdue <mcperdue@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Marc Perdue <mcperdue@GMAIL.COM>
Subject:      Re: Driver/Passenger window seals
Comments: To: John Rodgers <jrodgers113@gmail.com>
In-Reply-To:  <CA+az7_6BYXxGGU1X65gA8GRs+xu1Y1uqr=ai0-YAqftAtuTNTQ@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

In hindsight, I'd skip replacing the vent window seals. The
replacements don't fit well and they're a royal pain to replace. As
near as I can tell, they don't get rid of the whistling either. I
can't really tell because they're pretty much inoperable at this
point. If you want to go ahead and do it anyway, I'll be happy to give
you the tips that helped the most for me.

All the rest of it's easy as pie if you follow the video...
Marc Perdue

On Sat, Apr 9, 2016 at 3:26 PM, John Rodgers <jrodgers113@gmail.com> wrote:
> I'm about to attempt to replace the felt seals and scrapers on these
> windows. Is there anything special to watch out for.  I've watched the
> Go-Westy  Youtube on the subject, but is there anything else? I want to do
> the triangle window seals while I'm at it, and they do not address it!
> I'm concerned with removing the crappy chrome trim.
>
> Also, I have new sliding side windows to put in. Anybody done a
> remove/replace job there?
>
> Thanks,
>
> John