In a message dated 4/15/2016 9:03:56 A.M. Eastern Daylight Time, lalofs@GMAIL.COM writes: I am not familiar with this part and it's hard to see the details from the picture. Is it basically a Tee shaped steel piece with 4 holes in it? If so, it could be fabricated without much trouble. Do you already have the mirror image piece for the other side?
More or less.. but you have to get the angle and hole spacing right and the holes have nuts welded to them. All '90-'91 passenger vans had these rear shoulderbelts. i have some OEM factory one FS from a '91 seven passenger GL if anyones interested.. WITH the seatbelts included.. (not just the brackets, sorry) the factory ones have the concealed reel. Not a big fan of those aftermarket GoWe$ty ones as the reel sticks out and protrudes into the interior of the van.. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.