Date:         Thu, 21 Apr 2016 10:08:16 +0000
Reply-To:     "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject:      Re: ETKA
Comments: To: "SDF ( aka ,jim lahey' - Scott )" <scottdaniel@turbovans.com>
In-Reply-To:  <571867FC.90708@turbovans.com>
Content-Type: text/plain; charset=UTF-8

If you need an Etka but are away from home or on your tablet try
www.vagcat.com

Sign up is free and you can see all the VW part numbers, etc.

Ken

On Thu, Apr 21, 2016, 1:41 AM SDF ( aka ;jim lahey' - Scott ) <
scottdaniel@turbovans.com> wrote:

> you'll probably get something figured out.
>
> Odd to me though ..
> I do vanagon stuff left and right and I haven't looked at my ETKA in years.
> I just look at the vans !
> or find the parts I want online or just order 'em.
>
> or ...if I need some oddball bushing say, I just make one from my
> decades-old stash of oddball stuff like that.
>
> Anyone want to buy a used Lenova laptop running Ubuntu ?
> Was an XP originally.
>
> anyway ..good luck !
> Scott
>
> On 4/20/2016 3:48 PM, John Rodgers wrote:
> > Went to load my copy of ETKA on a newer computer - up from 32 bit to 64
> > bits, at 3.0 mhz , using Windows 7, and up pops a message that the
> program
> > is not compatible. Apparently the software was written in the Win-XP
> days.
> > So what to do? I'm sure I'm not the only one. Is there a work-around?
> I'm
> > lost without it!
> >
> > Thanks,
> >
> > John
> >
>