Date:         Mon, 18 Apr 2016 10:43:20 -0600
Reply-To:     OlRivrRat <OlRivrRat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <OlRivrRat@COMCAST.NET>
Subject:      Re: Write Up: Rear Table Mod
Comments: To: Abel Longoria <houstonphotog@GMAIL.COM>
In-Reply-To:  <CACrM94JmDfhzsSvRigMM0TZwJO+S5oHs0RY=dC1sV9WoTn9+wg@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

                Abel

        Nice TableMod ~ But ~ I would be inclined to use something a Bit More Substantial to Reattach the Table to the MountPlate ~

                These for instance ~

http://www.homedepot.com/p/The-Hillman-Group-3-8-16-Coarse-Brass-and-Gold-Steel-Wood-Insert-Nuts-5-Pack-880551/202242364

http://www.amazon.com/E-Z-Threaded-Insert-Internal-Threads/dp/B0026GZU0Q

        But ~ If I still had a Closet in My Westy ~ I would do what I think is an EasierMod & Simply Cut the ClosetDoor Just Below the

Bottom Hinge, then Reattach the 2 DoorParts Via a PianoHinge on the Inside so that when the Door is Opened the Bottom could be

Folded Up Out Of The Way ~ Frosting on ThatCake is that it Makes Possible the Stowing of the Longer RearTable in that location ~

                                                                                        ORR ~ DeanB

On 17 Apr , 2016, at 11:55 AM, Abel Longoria wrote:

> I relocated the mounting plate of my front table so that I could use it in
> the rear table location. This allowed me to be able to fully open the
> vertical closet door.
> 
> Check it out here:
> 
> http://texasvanagons.com/rear-table-mod/
> 
> 
> Abel Longoria