Date:         Fri, 6 May 2016 13:10:12 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Rear Brakes: E-brake lever lube,
              E-brake spring function (purpose)
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY180-W80CDDB2084905D5EC1F9DAA07D0@phx.gbl>
Content-Type: text/plain; charset=UTF-8

Ah, ok. Shoulda known better re: shims.     ;)
I see the shoe contact points on backing plate. Good tips.

I've often wondered that if a backing plate became thin enough due to corrosion,
would it flex under hard braking conditions.

So many details!

Neil.


On 5/6/16, Dennis Haynes <d23haynes57@hotmail.com> wrote:
> There are no shims on those lower anchors. With the GoWesty shoes and new
> drums there is no room for shims. The GoWesty HD drums are even a tighter
> tolerance. The silver you see there is nickel based anti-seize. Not that I
> also used brake grease on the pads where the shoes rest on the backing plate
> and where the shoes rest on the cylinders and lower mounts.
>
> The creeper is known as "The Bone". it has large wheels that easily roll
> over obstructions like tools.
>
> Dennis
>
>
>> Date: Thu, 5 May 2016 22:34:18 -0700
>> Subject: Re: Rear Brakes: E-brake lever lube, E-brake spring function
>> (purpose)
>> From: musomuso@gmail.com
>> To: d23haynes57@hotmail.com
>> CC: vanagon@gerry.vanagon.com

>> Wow. Just, wow; those backing plates have seen better days!


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>