Date:         Sat, 7 May 2016 08:18:12 -0400
Reply-To:     Steven Shelton <shelton4@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Shelton <shelton4@GMAIL.COM>
Subject:      Re: Galley LED recommendations
Comments: To: mfmagnani@sbcglobal.net
In-Reply-To:  <A1B9E608-A3DB-4B68-A136-6323B2A42B90@sbcglobal.net>
Content-Type: text/plain; charset=UTF-8

I used these lights for Lee Valley:
http://www.leevalley.com/US/wood/page.aspx?p=71702&cat=1,43349&ap=1.
The covers are plastic but the channels are aluminum.  I put a strip the
whole length above the table/sink/stove, but switched it so two halves were
controlled by separate switches.  I also put one in the aluminum channel
above the rear seat to illuminate the table when it's pulled out.  That
made a big difference for the person sitting on the passenger's side.

On Sat, May 7, 2016 at 12:24 AM, Michael Magnani <mfmagnani@sbcglobal.net>
wrote:

> Hi all,
> I'm interested in replacing my Westy galley light fixtures with more
> energy efficient LED ones and I'm looking for some recommendations. Any
> ideas?
> Thanks,
> Mike Magnani
> 1990 Westy
>
> Sent from my iPhone