Date:         Fri, 13 May 2016 14:02:48 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Measure, Visually Inspect Rear Brake Adjuster Wheel Teeth?
Comments: To: Scott <SCOTTDANIEL@turbovans.com>
In-Reply-To:  <57363FDE.60203@TURBOVANS.COM>
Content-Type: text/plain; charset=UTF-8

Thanks Dennis and Scott.

What I'd like to do someday, even just to show how the adjuster works,
is cut a "window" section out of an old brake drum so one could see
what happens with the shoes actually pushing up against the drum.

I think that would be possible.

Neil.


On 5/13/16, Scott <SCOTTDANIEL@turbovans.com> wrote:

> I've never had to replace one ..
> on hundreds of vanagons even ..
> There is some wear on the teeth of the wheel and on the pawl that
> notches into it, sure,
>
> Never had a problem though.  Not a weak are at all let's say.
>
> I do make sure the star wheel turns freely on the threads it rides on
> ..I make super sure of that.
> and I make sure the threaded 'bolt' turns very freely inside the round
> thing ..
> never saw one rusty there or stuck in any way.
>
> 'almost never a problem' is your basic answer, at least in my world.
>
> Scott



--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>