Scott Look on 97.70 in Bentley(early VIN #) Goes from alternator to the starter via terminal 30. Shows 2 R/W wires and 2 B+ terminals on the alt ... Not sure why. Didn't go looking under the hood to see my configuration. Sent from my iPhone > On Jun 1, 2016, at 3:12 PM, Scott <SCOTTDANIEL@TURBOVANS.COM> wrote: > > I'm so literal , lol. > > it is odd that the Bentley diagrams don't show that small red wire. > > obviously it has 'start signal' on it. > > start signal needs to get to ECU of course.. > but it's not via a small red wire at the solenoid terminal. > > My 86 has that small wire too. > I'm just leaving it connected and it's not bothering me ! > > I'm sure Mark D. knows what it's for. > >> On 06/01/2016 09:36 AM, Ed McLean wrote: >> I have been a bit sloppy with my descriptions. >> >> Yes, the ST +12vdc passes through the safety switch in the AT console, not >> directly from the ignition switch ST terminal. Thanks, Scott, for keeping >> me on my toes. I'll try to do better in the future. >> >> >> Ed >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.