Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2016, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 11 Jun 2016 10:34:21 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Aftermarket Radiator  Fan Solution
Comments: To: "William D. Pool" <rotaechojunk@GMAIL.COM>
In-Reply-To:  <6FEEA344-3014-4145-8539-5D0A32D76BAB@gmail.com>
Content-Type: text/plain; charset="us-ascii"

In addition to the motors I am also finding that many of the shrouds are also rusting out. Enough holes and the fans become useless, especially with AC.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of William D. Pool Sent: Saturday, June 11, 2016 10:15 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: Aftermarket Radiator Fan Solution

A cheap solution for non-AC vans is out there.

http://www.thesamba.com/vw/forum/viewtopic.php?t=601997

About $70. Did it to my van great results and another.

- I'm a mobile Willie replies are shortened -

> On Jun 11, 2016, at 6:33 AM, Dennis Haynes <d23haynes57@HOTMAIL.COM> wrote: > > Here is a link to some pictures for a fan replacement. It was > difficult to find a fan that low profile, large diameter, easily > mountable. I am working on putting this together as a kit. I would > recommend that some type of heat insulation be installed on the > firewall and floor area. This fan boasts > 2,500 cfm at 17 amps. This the same current draw as the smaller fans > used without AC or the earlier vans. Using the low speed resister of > the later vans with AC the current draw is 12 amps and the medium > speed brings it up to about 15. If you have the late/larger fan set up > wiring is direct. Use what you have. > > As a kit I am thinking around $220 for the later vans, $260 for the > ones that will need a resistor and harness. > > > > What do you folks think? > > > > Dennis > > > > > > https://onedrive.live.com/redir?resid=9B02084A888884A6!135680 > <https://onedrive.live.com/redir?resid=9B02084A888884A6!135680&authkey > =!APvK > t2BpmT0-I8o&ithint=folder%2cjpg> > &authkey=!APvKt2BpmT0-I8o&ithint=folder%2cjpg


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.